fbpx

SUBER by Kolmer™

Increase energy efficiency by up to 20%

While providing superior protection and appearance!  Our coating is durable, flexible, and aesthetically beautiful.

is a patented exterior coating system manufactured from 96% high-grade raw cork

A proprietary highly adhesive water-based acrylic resin. It has superior thermal and acoustic insulative properties, is UV resistant, and impervious to wind-driven rain while maintaining healthy water-vapor transmission. This unique combination allows for optimal protection of the substrate while permitting natural curing to occur. Naturally, cork is deterrent to insects, mold or mildew growth, fire retardant, and is a 100% renewable natural resource.

Product Options

SUBER by Kolmer™ is available in four application formulations:

  • Standard.
  • Hi-Traffic (High Resistance).
  • Waterproof.
  • Fireproof.

Application

SUBER by Kolmer™ requires minimal surface preparation for most substrates, such as, but not limited to:

  • Wall sheathing over wood or metal framing.
  • Concrete masonry.
  • Tilt-up concrete panels.
  • Metal roofing and siding.
  • Interior Ceiling/Floor.

A two-coat spray application is recommended. Hand, palette knife, or trowel applications are alternative installation methods. 

Full drying time is 8 hours to 48 hours depending on substrate and application purpose.

Sustainable

SUBER by Kolmer™is a “green product.” It has a low VOC content and is completely free of formaldehyde and similar potential toxins. The installed material actually provides a negative carbon footprint, is 100% recyclable, and qualifies for LEED credits. It is an ideal coating, due to energy savings qualities, for self-sustaining building projects. Potential LEED credit contributors include:

  • MR Credit 4 Recycled Content.
  • MR Credit 6 Rapidly Renewable Materials.
  • IEQ Credit 4.2 Low-Emitting Materials.
  • ID Credit 1 Innovation in Design.

Additional

Please select a category tab for more information.

The manufacturer carries ISO 9001 and ISO 14001 certifications.

Testing

SUBER™ by Kolmer USA has been extensively tested in both European and US labs, along with over 14 years of actual field use. Additionally, we have testing on acoustical impact and fire resistance, available upon request. Following are test results specifically targeting substrate coating performance:

Testing conducted by PRI, accredited by the International Accreditation Service (IAS), a subsidiary of the International Code Council (ICC) as an ISO 17025 testing laboratory; by the Miami-Dade County Building Code Compliance Office as a testing laboratory; by the State of Florida Department of Community Affairs as a Product Testing Laboratory; and by the Cool Roof Rating Council as an Accredited Independent Testing Laboratory.

SUBER™ by Kolmer USA requires minimal surface preparation for most substrates, such as, but not limited to:

  • Wall sheathing over wood or metal framing.
  • Concrete masonry.
  • Tilt-up concrete panels.
  • Metal roofing and siding.
  • Interior Ceiling/Floor.

 

A two-coat spray application is recommended. Hand, palette knife, or trowel applications are alternative installation methods.

Full drying time is 8 hours to 48 hours depending on substrate and application purpose.

Note:

 

  • Allow initial coat to fully dry prior to additional application.
  • Insure substrate should be dry, stable, and free from dirt.
  • Application temperature should be between 38° and 86° F. Storage should be between 38° and 90° F.

Manufacturer will provide a standard 15 year material warranty, when applied according to manufacturer installation guidelines by a certified applicator. See manufacturer warranty for complete details.

VOC Maximum 19 g/l
Spread Rate Approx. 20 (ft2/gal.)
Solid Content Approx. 45%
Weight Approx. 7.6 (lbs./gal.)
Thickness Approx. (Dry) 120 mils. (3mm)

Let’s Start Something new
Say Hello!